Necking machine
Introduction
1.Technical parameters:
- Rated power: 11.5KW
- Main motor 7.5kW
- Hydraulic motor 4 KW
- Power supply voltage: 380V /50HZ
- Hydraulic pressure: 14MPa
- Processing thickness: 4mm
- Machining diameter 340-600 mm, workpiece height 97-147 mm
- Workpiece material:
- Dimensions: 2600 * 1100 * 2900(Length * width * Height)
2.Machine instroduction
This equipment is a machine for necking 340-600 covers
Main structure and function of equipment:
2.1 frame: square tube and steel plate welding
2.2 upper pressure supports: steel plate welding
2.3 positioning mechanism: roller positioning.
2.4 Necking station: the inner mold is driven by power, the outer mold is pushed horizontally, and the oil cylinder drives the outer mold for necking.
2.5 upper pressure parts: driven by cylinder and pressed on the covers.
2.6 power part: 7.5kW motor with helical gear reducer. The power part drives the inner supporting die.
3.Main equipment configuration:
Name
Spec.
Qty
Reducer (with main motor)
KF77-7.5KW-10-m5-180°
1
Hydraulic large motor
4KW
1
necking cylinder
125×80 adjustable 40
1
upper compression cylinder
160×500 adjustable 100
1
Hydraulic system
1
Electrical control system
1
4.Working Process and Capacity:
4.1 Manual loading, cylinder pressing the workpiece.
4.2 Motor starting, then necking the covers.
4.3 Motor stops, all parts return to position, and upload the covers manually.
4.4 Tempo: load workpiece (10s) + pressing workpiece (5s) + Necking (20s) + Unloaded workpiece (10s) = 45 seconds for one workpiece
Video
Gallery
Introduction
1.Technical parameters:
- Rated power: 11.5KW
- Main motor 7.5kW
- Hydraulic motor 4 KW
- Power supply voltage: 380V /50HZ
- Hydraulic pressure: 14MPa
- Processing thickness: 4mm
- Machining diameter 340-600 mm, workpiece height 97-147 mm
- Workpiece material:
- Dimensions: 2600 * 1100 * 2900(Length * width * Height)
2.Machine instroduction
This equipment is a machine for necking 340-600 covers
Main structure and function of equipment:
2.1 frame: square tube and steel plate welding
2.2 upper pressure supports: steel plate welding
2.3 positioning mechanism: roller positioning.
2.4 Necking station: the inner mold is driven by power, the outer mold is pushed horizontally, and the oil cylinder drives the outer mold for necking.
2.5 upper pressure parts: driven by cylinder and pressed on the covers.
2.6 power part: 7.5kW motor with helical gear reducer. The power part drives the inner supporting die.
3.Main equipment configuration:
| Name | Spec. | Qty |
| Reducer (with main motor) | KF77-7.5KW-10-m5-180° | 1 |
| Hydraulic large motor | 4KW | 1 |
| necking cylinder | 125×80 adjustable 40 | 1 |
| upper compression cylinder | 160×500 adjustable 100 | 1 |
| Hydraulic system | 1 | |
| Electrical control system | 1 |
4.Working Process and Capacity:
4.1 Manual loading, cylinder pressing the workpiece.
4.2 Motor starting, then necking the covers.
4.3 Motor stops, all parts return to position, and upload the covers manually.
4.4 Tempo: load workpiece (10s) + pressing workpiece (5s) + Necking (20s) + Unloaded workpiece (10s) = 45 seconds for one workpiece
Video
Gallery
